The Westin Sportsman Grille, # 40-2075, for the 2016 Nissan Frontier uses included mounting brackets to attach to two pre-drilled and threaded holes in the truck's frame.
The lower brackets will be the connection point for the lower section of the grille guard. The upper mounting brackets will connect to the frame trough openings in the bumper. The attached instructions has photos and diagrams that explain how to install this grille guard. view full answer...
The Westin HDX Grille Guard with Punch Plate, part # 57-3665 you referenced is designed to fit 2013 GMC Sierra 2500 and 3500 trucks. It does not require cutting the grill when installing. This guard offers full protection on the front of your truck.
If your Sierra is a 1500 model, then part # 57-2295 would be the grille guard you would need to order. view full answer...
It does appear that the grille guard in the bumper of your 2008 Ford F-150 will have to come out to install the HDX Griller Guard # 57-2015. Below are the installation steps:
1. Remove all contents from box, verify I all parts listed are present and free from damage. Carefully read and understand all instructions before attempting installation.
2. Pull out plastic pegs that hold rubber flap on the bottom, but do not remove rubber. Remove plastic punched grate from bumper opening on both... view full answer...
The Replacement Mounting Kit Sportsman Grille Guard # 40-201PK that you referenced is designed to fit the Westin Sportsman Grille Guard # 40-2015, black powder coated steel and polished stainless steel. Both of these guards are confirmed to fit your 2006 Ford F-150. Based on the installation instructions for these grille guards, the guard will attached to the truck in 2 places. I have attached a photo from the installation instructions of the upper brackets and lower brackets that will... view full answer...
I attached a picture that shows a similar grille guard that also comes with a winch mount installed on a similar Ford truck for you to check out. It would basically install in the same way on your truck. view full answer...
Yes we do have a replacement hardware kit for the Westin HDX grille guard part # 57-2500 that fits your 2013 Ford F-150 with the part number # 57-250PK. You should note that you can't adapt a grille guard from one truck to another by just swapping hardware kits as the guard is all custom fit for each truck application. view full answer...
There is minor trimming required on the lower valance for the bottom brackets on a 2010 Dodge Ram 2500. However since it is the lower valance and the view of it would be blocked by the grille guard anyway the trimming should not be noticeable. I have included a link to all of the grille guards that fit your truck. view full answer...
Thank you for providing a photo of the grille guard you wish to install on your 2006 Ford F-250 Super Duty.
I checked the full-coverage grille guards we offer for your truck and we have two. Both can be seen on the link provided. Both are from Westin and fit all models of the 2006 F-250.
If you take a look at the linked photo that shows one of these, part # 40-1645, you will notice that the mounting points are located at the very bottom of the structure, on the two main vertical posts.... view full answer...
I have an answer for you concerning your TSS sensors on your 2019 Toyota Tacoma TRD. Unfortunately, I confirmed with my tech at Aries that all Aries grille guards like the # AA2068-2 interfere with the TSS sensors on your truck. As far as the Westin Sportsman Grille Guard with Winch Plate 40-93885, we have tested this model and it also interferes with front TSS sensors/parking sensors.
Currently, we do not have any grille guards that do not interfere with the sensors on your truck. view full answer...
When you change the headlights of a truck like what the Westin HDX Grille Guard # 57-3550 fits you actually access the bulb from behind the light under the hood so the grille guard would not interfere with that at all.
You'd have to pop the hood and reach down from behind the housing. view full answer...
I did some looking around and I've found a similar brush guard by Westin; The Westin HDX Grille Guard with Punch Plate # 57-2505 is designed to fit your truck and ships with all the hardware and mounting brackets.
Unfortunately, I don't believe the grille guard you've sent a picture of is designed to fit your 2013 Ford F-150. If you can provide a part number i would be more than happy to help. I've also linked a PDF that explains how to install the Westin HDX Grill Guard which includes... view full answer...
The frame rails on your Tacoma could be behind some plastic molding on the bottom of the truck. You may also need to remove a metal skid plate to access the frame and attach the Westin Grille to your Tacoma.
The correct grille for your 1999 Tacoma is the Westin Sportsman Grille Guard, part # 40-0905. The item you selected, part # 40-1605, will only fit the 2005-2011 Tacoma.
I am sending instructions for the Westin Sportsman Grille Guard, part # 40-0905, in a separate email. view full answer...
I spoke with my contact at Westin about your 2007 Ford F-150. The Westin HDX Grille Guard, part # 57-2015 is a fit for your truck and they told me that it is a bolt-on application and does not require drilling. view full answer...
There is some minor trimming required of the lower valance to install the bottom brackets for the Westin HDX grille guard # 57-2505, on your 2010 Ford F-150. But the trimming will not be noticeable especially with the awesome grille guard at the front of the truck. I have included a picture from the instructions showing the small area that will need to be trimmed. view full answer...
If you were okay with totally removing the HDX Grille Guard part # 57-3550 before installing the plow mount this would work, but since both attach to the same part of the truck frame you wouldn't be able to easily have both mounted at the same time.
I attached a picture that shows what the brackets of this grille guard look like installed. view full answer...
The Westin HDX grille guard # 57-2235 fits all models of the 2013 Toyota Tundra so there should be no problem with your double cab 4x4.
Installation is straight forward and you can perform this installation at home with hand tools. view full answer...
I spoke with my Westin contact who tells me that their grille guards aren't tested for collision with animals. Their grille guards would almost certainly offer a good degree of protection in the event you were to hit a deer, but the guards are designed to be a cosmetic accessory, not a push bar or battering ram.
There is no drilling to install this grille guard either. view full answer...
I was able to determine that the factory tow hooks will be kept when installing the Westin Sportsman Grille Guard # 40-3555 on your 2014 Ram 2500. There may be some trimming required on the lower valance for the brackets that attach to the frame.
One person could perform this installation but 2 would make it much easier when it comes to attaching the grille guard to the brackets. view full answer...
Yes, I checked with Westin and the replacement Sportsman hardware kit part # 40-126PK that you referenced would be the correct kit for a 2005 Chevy Silverado 2500HD like yours. This would have to fit a # 40-1265 though and would not work to fit a different grille guard to your truck. view full answer...
It sounds like you are talking about the lower air dam on the 2012 Dodge Ram 1500. There should be 6 bolts that hold it on located on the underside of the truck. The Westin Grille Guard, # 32-1965, does not have a template from trimming the air dam. Basically what you will do is remove the air dam, install the grille guard, and then trim the air dam as needed to fit around the grille guard. I have included a link to the installation instructions for you.
It is also recommended to use the... view full answer...